DVC MONITOR CLOUD
Monitoring and control of engineering equipment
1. About the service
DVC MONITOR is a universal platform for monitoring and remote control of engineering equipment.
The service works with DVC Point LTE and DVC Point WIFI modems, which are transparent converters RS485 → GSM and RS485 → WIFI Internet.
It is used in industry, utilities, energy, agriculture, service, and manufacturing.
DVC Point Monitor cabinet & DVC Point Monitor compact are ready – made devices (sets) for monitoring equipment. They are already set up to work with the DVC Monitor Cloud
DVC Point GSM or DVC Point WIFI are just transparent modems for widespread use.
Main features:
Control of electrical equipment with RS485 and receiving data from sensors.
Monitoring eco-sensors with RS485 and 0–5V interface.
Device control and quick reaction to failures.
Connection via RS485, 0–5V, GSM, Wi-Fi, Modbus.
Integration with existing devices without replacement.
Scaling to distributed networks.
White-label solutions supported.
Service life 5–10 years, saves settings after power loss, restores connection.
Local server with DVC Point WIFI controllers allows work without Internet.
Two-factor login, data stored locally or in the cloud.
System blocks suspicious connections and alerts the administrator.
Data storage from 1 month to several years; export to Excel/PDF.
Built-in analytics and forecasting of energy use, peak loads, and power quality.
Custom alerts by Email.
Intuitive interface, demo mode, staff training.
24/7 support for corporate clients, warranty and post-warranty service, regular software updates.
Reduction of energy costs, automation of resource accounting, ROI calculation, expense optimization.
Expanding functions: new sensors, Smart City solutions, custom upgrades.
Equipment rental option – discuss with manager.
Pilot projects, case studies, cooperation with integrators, dealers, and government bodies.
2. DVC MONITOR CLOUD functions
Register unlimited number of sites in one account.
Configure RS485 port and TCP/IP connection via RS485 /Hercules, DVC Lab/, SMS, /DVC Monitor Server, DVC Lab Server/.
Measure main and extended electrical parameters.
Receive data from additional sensors (Module A).
Control connection quality with the object.
Show location on map by address and/or GPS.
Open/close DVC Point contacts permanently or for 2 sec pulse.
Build charts of all parameters (archive depth depends on tariff).
Notifications about limit exceed, device state change, object connection/disconnection.
Work via GSM and Wi-Fi networks.
Waterproof case.
New object connection for monitoring in 15 minutes.
3. Pricing
DVC Point Monitor cabinet — from $270.
DVC Point Monitor compact — from $245.
- DVC Point GSM/WIFI board – $69.53
Monthly subscription using the DVC MONITOR CLOUD — from $35/month.
(GSM traffic depends on country and operator rates.)
Equipment and service prices are listed in the Prices section.
For special or corporate orders contact: info@division.business or WhatsApp +972585471086.
4. Applications
Monitoring equipment where long downtime or failure is critical (boilers, heaters, refrigeration, pumps, air conditioners, thermostats, etc.).
Evaluating work mode by energy use (e.g. number of serviced cars at car wash per day).
Preventing breakdown of expensive equipment when parameters slowly change (e.g. heating of mechanical parts).
Control of chemical sensor data (dissolved oxygen, air/water/soil impurities, etc.).
5. Quick Start
5.1 Connection and start
Buy a monitoring module: Point Monitor cabinet or Point Monitor compact (Wi-Fi or GSM).
Go to Division.business and register your device/site. You will get confirmation by Email.
Connect Point Monitor to your equipment according to manual (often can be done by yourself).
If connected successfully, within 1–2 minutes you will get an Email notification.
5.2 Registration
Go to division.business.
In the cube-menu select: DVC MONITOR → LOG IN.
Log in or register a new site.
Enter contact info and data from Point Monitor passport, press SAVE.
System will redirect you to Sites page (or go manually via Account → Create site).
5.3 Use
On the Sites page select your site.
In menu Cube → INFO you can open: Charts, Parameters & Limits, Map, Control Panel.
On Parameters & Limits page set thresholds to get alerts for important events.
Extra tools: Cube → DVC Tech, Cube → Memoirs, Cube → AI Assistant and more.
5.4 Support
At any time you can get help from AI Assistant.
All manuals are on our website division.business.
If needed contact info@division.business or WhatsApp +972585471086.
For corporate clients we provide staff training; support level defined in contract.